Unless one of your outlets is wired backwards, plugging this into 2 outlets on the same side of your electrical panel won’t do anything.
If you were able to plug it into outlets on different sides of your panel, then you just created a 240v short and the cable is going to be real-spicy real-quick.
i managed to do that to myself once in my sleep; i had managed to wrap my arm around a lamp cord which came out of the plug, and when i rolled over i managed to put my thumb on the exposed wires.
I’ll never understand why the US refuses to modernize the horrid NEMA 5 connectors. A recessed receptacle, insulators around the base of the live and neutral blades, spring-loaded detention mechanism to keep the connector from slipping out… in its current state, it’s only two steps removed from sticking the bare wires into the socket.
Because everything the EU and the rest of the world does is stupid. By adapting things from other countries would be akin to acknowledging that other countries can do some things better than the US. But this can’t be, since the US is Numbaaa 1! /s
Arrogance: we especially don’t want to do it because the rest of the world does.
Cost: not the equipment, though that can get pretty pricey considering we up the margins on everything, but mostly labor; labor is ungodly expensive (they cry insurance or (my fave) “you’re paying for the years of experience”).
i guess if you’re got a bad breaker on your panel, you can load 2 circuits on one breaker with that thing, at least until the hardware store opens. you still get overcurrent protection… but a very unlikely thing to need
The last extension cord you will ever need.
at least it’s short enough that it will only reach two plugs on the same panel, thereby guaranteeing that the first things that blow are breakers.
You are forgetting the plug on the knob that will plug it in
Yeah, not what I need. I need NEMA 5-15 to CAT6 adapter
the P in PoE stands for Pulverization
Unless one of your outlets is wired backwards, plugging this into 2 outlets on the same side of your electrical panel won’t do anything.
If you were able to plug it into outlets on different sides of your panel, then you just created a 240v short and the cable is going to be real-spicy real-quick.
then the thermal breaker would jump
Unless you accidentally touch one of the prongs after plugging one end in… 😅
Alternatively, One can plug one end in, then you have a creative new way to parent.
“Didn’t mow the lawn? C’mere Billy, hold out your palm.”
i managed to do that to myself once in my sleep; i had managed to wrap my arm around a lamp cord which came out of the plug, and when i rolled over i managed to put my thumb on the exposed wires.
I’ll never understand why the US refuses to modernize the horrid NEMA 5 connectors. A recessed receptacle, insulators around the base of the live and neutral blades, spring-loaded detention mechanism to keep the connector from slipping out… in its current state, it’s only two steps removed from sticking the bare wires into the socket.
Because everything the EU and the rest of the world does is stupid. By adapting things from other countries would be akin to acknowledging that other countries can do some things better than the US. But this can’t be, since the US is Numbaaa 1! /s
i don’t live in north america, but this was in a house from the 1910s.
Tbh insulating the blades bases would be a huge step in the right direction, and there’s no remodeling required.
At least for homeowners, factories would need new production lines presumably.
Laughs in generator.
Even better:
Is this the one you use to feed the house from a generator? If so, I think that’s the one time it’s valid
You can get a male-ended socket on the house for that exact scenario.
Don’t forget a master switch between it and mains. Otherwise, line workers (and you) could get injured.
Bonus points if it auto-switches based on whether mains is available.
Oh that’s so much smarter.
i guess if you’re got a bad breaker on your panel, you can load 2 circuits on one breaker with that thing, at least until the hardware store opens. you still get overcurrent protection… but a very unlikely thing to need