Here I thought I had been insanely smart to buy a GPU from 2010 for $10 since the CPU is going to do all the encoding anyway. And because my previous card, a honking 3080, wouldn’t have allowed for the other two capture cards to be installed, taking up all the real estate.

I have been trying to setup an Artix system on my own for two hours now, but GRUB won’t install in CSM mode… I’ve tried UEFI on GPT, BIOS on MBR, BIOS on GPT… 😅 Boot partition with and without file system… 💀

I’ll just buy a more modern yet slim card, I guess? Unless I wake up tomorrow and give researching the issue a chance.

Night👋🔌

  • Thorry@feddit.org
    link
    fedilink
    arrow-up
    2
    ·
    edit-2
    2 hours ago

    That’s tight fit. If you really need the two capture cards then that’s the room you’ve got to work with. If you can bring it down to just one card at the top that would be a lot better. I personally use a capture card that’s connected using USB3, which works very well and doesn’t require room inside the computer (even though I would have room).

    Most videocards have two or three fans on the bottom these days, with such a tight fit one of the fans can easily collide with the capture card. And even when it doesn’t it will have a hard time sucking in air from there. You can try and find a blower type card, but that would be a bit harder to find.

    And you wouldn’t happen to have a GPU inside the CPU? Because the iGPUs from AMD are very solid if you don’t need much in terms of performance (easily faster than the 1030 you mentioned). Otherwise two capture cards and a GPU is a big ask in such a small case.

    • printf("%s", name);@piefed.blahaj.zoneOP
      link
      fedilink
      English
      arrow-up
      2
      ·
      edit-2
      1 hour ago

      Thanks! You just gave me two ideas:

      1. I already have all the hardware I need: if I do as you say, and only work with one capture card at a time - namely, FireWire or VGA - I can simply swap them whenever I need to. Cards as small as these won’t be to much of a hassle to swap, especially since the side of the case/chassi simply pops off/comes off with a click. I would then be able to use my 3080 and call it a day. And have huge processing power.
      2. I could just buy an ATX chassi and put the 3080 at the bottom, thus fitting all the cards.
      3. Bonus: I too have an HDMI to USB capture card, but that’s for digital only. The whole reason that I bought the card at the top is because it takes digital and analog. Which sounded cool.

      I think I’ll try #1 before investing any more money at the moment. Again, thank you so much for taking your time! 🥰

      • Thorry@feddit.org
        link
        fedilink
        arrow-up
        2
        ·
        1 hour ago

        Sounds like an excellent idea! If you ever get tired of swapping, an USB capture card is a lot cheaper than a new GPU with current prices. Good luck!