Had to do some work with SuSE post Novell acquisition for a customer. IIRC the package manager is a bit odd, but I haven’t looked at it in what nearly 15 years, so I can’t really remember much about it. What I CAN remember involved running packet traces using Wireshark - it was mostly network problems, I think, so nothing to do with SuSE. It was certainly very popular in Europe, though I have no idea what they’re doing these days!
You never know … maybe THIS year!
The way windoze 11 is going - people really hating it - you never know, but I’m not holding my breath. Linux is still very niche, and people are wary of “strange” “new” things, especially FREE ones - where’s the catch? I’ve seen it surge and blossom over the years, but it’s still got a really tiny install base (as long as you don’t count Android and embedded tech, where the OS and kernel are largely irrelevant to the user). But I don’t see people moving over to Linux in droves any time soon, really: I’ve seen too much.
For context, I’ve been using it since [dredges up old memories] slackware was new, so about 1994, when a work colleague and I installed it (off about 20 floppies) onto an old 386sx PC with probably 4MB of RAM. Been using it ever since - and from Red Hat 4 onwards (about 1999) it’s been my only OS on my own computers. I’ve always preferred it, and I’ve seen it grow in so many ways - I’d still use it if it was illegal. I haven’t tried EVERY distro, but I have tried most. These days I mostly stick with Debian or Debian-based distro’s (I’m currently on Mint LMDE).
Don’t have any experience with this particular model, but I have found that with most printers on Mint you don’t have to “do” anything at all - if it’s on the network or plugged into the USB, the system will find it and install a driver automatically. I’ve used MANY printers with Linux over the years, and some were a right PITA to set up, but so far all the printers I’ve tried with mint have “just worked”. The only problem I’ve had recently was that when I updated to the Debian Trixie based LMDE 7, a bug in CUPS misconfigures EPSON ET2860 when automatically discovered, but it still works on stock Mint 22.3 without manual intervention. The fix is to manually add it, rather than accepting the auto discovered one, so it’s a problem with the discovery function, not drivers, and I suspect it’s due to some kind of quirk with this printer’s firmware that defines how it interacts to discovery queries on the local LAN.
Salmon reversing aid.
You’re quite right, Ozone is actually O3, I got that wrong. I should have looked it up, but I didn’t, hence the error. I’m so sorry I mislead you - can you forgive me? Ozone is actually very interesting - did you know there is a layer of the upper atmosphere known as The Ozone Layer, and that it has a hole in it? Also, Ozone is sometimes produced by chemical reactions and electrical arcs - it has a distinctive, Ozoney smell. As you also made mistakes, I think we are now even - have you ever considered taking up a career as a Large Language Model?
This diagram is wrong on so many levels. Ozone is “charged Oxygen” (O1 rather than the usual O2) so it’s saying you get Ozone out of the Hydrogen side. The bubbles are forming in a place where they can’t get to the output vents, so the accumulating gases would slowly force the water level in the inner chamber down, and thus up through the vents. It’s pretty shit. Is it AI slop?
Could be QOS or packet shaping going on at your ISP, or just throttling or congestion. Speed tests only really test for typical traffic patterns, so will give you a warped view: it certainly disagrees with your observed measurements. There are lots of factors that can affect how quickly traffic passes between two hosts on the internet, but domestic broadband is generally the worst of all worlds - you usually share bandwidth with other subscribers, and although the throughput can be quite good, the latency and error rate can be quite bad, and you can get fragmentation as frame sizes can differ between network segments, causing buffering especially when congestion is occurring. Your ISP might also have deprioritised your type of traffic, or they might be dropping packets, which causes retries, and thus slows your connection down.