Hi folks, my NAS is running on this motherboard: https://rog.asus.com/motherboards/rog-crosshair/rog-crosshair-vi-extreme-model/spec/
I currently have the following:
- M.2 NVME Boot Drive 1TB SSD
- M.2 NVME App Drive SSD
- SATA HDD Pools
- SATA SSD Pools
- 2x GTX 1080s SLI
- 1 USB 3.1 PCIe card
- 32 GB DDR4 (wish I had bought 64Gb before prices went crazy, but it’s perfectly manageable)
As you can probably tell, this was a gaming PC at one point, but now I have it in a massive case, so it’s really easy to get in there and mess with stuff on my home rig.
Here’s my quandry: I currently have a 1TB M.2 drive as my boot drive of which ~16Gb is used. SSDs are obscenely expensive right now and I’m out of room for games. I’ve read online that you can use Intel Optane memory as a boot drive.
This unit in particularly was recommended: https://www.amazon.com/Intel-Optane-Memory-Xpoint-Retail/dp/B078ZCZ5H9
My question is this, and it sounds a bit silly for someone who can self host to not know this, but how do I insert the optane memory and is it compatible with my mobo? I see it has a PCI 3.0 connection type but it has a little half-moon screw divot on the end like an M.2 drive. Do I just push a drive like this upright into one of the PCIe slots or does it have to go into that second m.2 slot the motherboard specs show supports PCI 3.0. I’m trying to avoid using the second M.2 slot since I might want to add a second SSD for apps later on as I already get an earful whenever the Jellyfin goes down. :D Alternatively, I’m considering using the SATA SSD as a boot drive. I’ve read that once everything is up, it’s all loaded into RAM anyway and the boot drive speed is not really important anymore. I can tolerate an extra 15 seconds on startup more a machine that might get rebooted once or twice a week when things are running smoothly. I could give up the USB 3.1 PCIe card as I think there are some headers hooked up to the case ports.
What would you do in my situation?
optane modules can be reformatted and used as a regular m2 nvme ssd. i have used one here before, just drop it in and ran mint or whatever installer and let it do its thing. they’re kinda slow (relative to recent gen nvme) but high endurance. so to answer your question, it would displace one of your m2 ssd.
if there’s an unused sata port, i’d probably go with your other option–sata boot. take care cloning bootable nvme to sata.
They are a nvme m.2 drive. What makes them special is if you wanna use them as cache which is done in software + firmware.
Since it sounds like you just wanna use it as a regular ssd any m2 slot should be fine. There are also m.2 to PCIe adapters.
An important detail, when you connect a bunch of m.2 drives and PCIe devices. (m.2 slots are essentially PCIe slots with a different connector) The motherboard will divide the lanes between all the devices. (Could result in i/o bottlenecks)
If you have any sata type m.2 drives it’s common for the motherboard to disable a regular sata port.
That motherboard has a very limited number of PCIe lanes. Using the second m.2 slot will slow down the second GPU. All of the other slots are coming from the chipset and are only PCIe 2.0.
I would get rid of the second GPU, then there would be enough lanes to run 3 SSDs at PCIe 3.0 x4.
Just as a warning, this post is liable to be deleted due to Rule 3. I had an earlier hardware post that I commented on deleted for this reason earlier today.
I appreciate the warning. I could see that and I’ll graciously accept it if it happens. I would still like to get the self-hosting communities pov because I want to be aware of any weirdness I should know about when it comes to running TrueNAS off of this kind of memory, especially in regards to the comment about everything being loaded into RAM after boot. Is boot drive speed on TrueNAS not that impactful?
I could see that and I’ll graciously accept it if it happens.
That’s about all you can do. To me, if you are a selfhoster with an equipment question, who better to ask than selfhosters who utilize the same equipment. The absence of very active Lemmy instances dictates that equipment questions will get funneled to the most active communities. I had one deleted yesterday. No worries, it all got sorted out and I did get my question answered thanks to some very patient and knowledgeable users.
