From my /etc/resolv.conf on Debian trixie, which isn’t using openresolv:

# Third party programs should typically not access this file directly, but only
# through the symlink at /etc/resolv.conf. To manage man:resolv.conf(5) in a
# different way, replace this symlink by a static file or a different symlink.

I mean, if you want to just write a static resolv.conf, I don’t think that you normally need to have it flagged immutable. You just put the text file you want in place of the symlink.

Also, when you talk about fsck, what could be good options for this to check the drive?

I’ve never used proxmox, so I can’t advise how to do so via the UI it provides. As a general Linux approach, though, if you’re copying from a source Linux filesystem, it should be possible to unmount it — or boot from a live boot Linux CD, if that filesystem is required to run the system — and then just run fsck /dev/sda1 or whatever the filesystem device is.

I’d suspect that too. Try just reading from the source drive or just writing to the destination drive and see which causes the problems. Could also be a corrupt filesystem; probably not a bad idea to try to fsck it.

IME, on a failing disk, you can get I/O blocking as the system retries, but it usually won’t freeze the system unless your swap partition/file is on that drive. Then, as soon as the kernel goes to pull something from swap on the failing drive, everything blocks. If you have a way to view the kernel log (e.g. you’re looking at a Linux console or have serial access or something else that keeps working), you’ll probably see kernel log messages. Might try swapoff -a before doing the rsync to disable swap.

At first I was under suspicion was temperature.

I’ve never had it happen, but it is possible for heat to cause issues for hard drives; I’m assuming that OP is checking CPU temperature. If you’ve ever copied the contents of a full disk, the case will tend to get pretty toasty. I don’t know if the firmware will slow down operation to keep temperature sane — all the rotational drives I’ve used in the past have had temperature sensors, so I’d think that it would. Could try aiming a fan at the things. I doubt that that’s it, though.

GPU prices are coming to earth

https://lemmy.today/post/42588975

Nvidia reportedly no longer supplying VRAM to its GPU board partners in response to memory crunch — rumor claims vendors will only get the die, forced to source memory on their own

If that’s true, I doubt that they’re going to be coming to earth for long.

Prices rarely, if ever, go down in a meaningful degree.

Prices on memory have virtually always gone down, and at a rapid pace.

https://ourworldindata.org/grapher/historical-cost-of-computer-memory-and-storage

If consumers aren’t going to or are much less likely to upgrade, then that affects demand from them, and one would expect manufacturers to follow what consumers demand.

I remember when it wasn’t uncommon to buy a prebuilt system and then immediately upgrade its memory with third party DIMMs to avoid paying the PC manufacturer’s premium on memory. Seeing that price relationship becoming inverted is a little bonkers. Though IIRC Framework’s memory-on-prebuilt-systems didn’t have much of a premium.

I also wonder if it will push the market further towards systems with soldered memory or on-core memory.

You can have applications where wall clock tine time is not all that critical but large model size is valuable, or where a model is very sparse, so does little computation relative to the size of the model, but for the major applications, like today’s generative AI chatbots, I think that that’s correct.

Last I looked, a few days ago on Google Shopping, you could still find some retailers that had stock of DDR5 (I was looking at 2x16GB, and you may want more than that) and hadn’t jacked their prices up, but if you’re going to buy, I would not wait longer, because if they haven’t been cleaned out by now, I expect that they will be soon.

Took down Framework’s website, which I was using.

Just keep in mind that the long run trend for storage prices is pretty strongly downwards; that’s a log-scale graph.

IRC, though you’ll want to use it over TLS.

XMPP, which someone else listed, is also good if you want a more instant-message-like interface.

is a pain in the assn

is dependent on 3rd parties

Well, one of the two, at any rate.

Sorry to hear that you’re feeling under the weather. I enjoy all your Sandy posts.

No problem. Yeah, it’s an invaluable off-site resource that new users don’t get informed about. Indexes all of the Threadiverse instances, whereas any given instance can only search the communities that are local or at least one local user has subscribed to.

https://lemmyverse.net/communities?query=networking&order=active_month

If this is the cave I’m thinking of, it’s huge.

kagis

I don’t know if there is a “Phong Nha cave”, but the one I’m thinking of is in Phong Nha-Kẻ Bàng National Park, so I’m guessing that that’s it.

https://en.wikipedia.org/wiki/Hang_Sơn_Đoòng

Sơn Đoòng cave (Vietnamese: hang Sơn Đoòng, IPA: [haːŋ1 ʂɤːn1 ɗɔ̤ŋ2]), in Phong Nha-Kẻ Bàng National Park, Quảng Trị Province, Vietnam, is the world’s largest natural cave.[1]

I think that the above image is from a sinkhole where the roof opens up partway through it.

There’s some YouTube video I saw a while back that did flybys of 3D models.

I think that he’s probably right, but there are legless lizards out there.

https://en.wikipedia.org/wiki/Legless_lizard

I found that while the lemmy_server process starts successfully and shows “Starting HTTP server at 0.0.0.0:8536” in logs, nothing is actually listening on port 8536.

Does:

# netstat -ntap|grep 8536

…show anything bound to the port?

I’m not sure how you determined that it’s not binding to the port, but that’s how I’d check.

There isn’t much that should stop a process from listening on a port over 1024 unless another process is already listening on it.

I don’t know why you want a BIOS update.

If you’re wanting VT-x support, looks like it’s present.

https://mobilespecs.net/laptop/Toshiba/Toshiba_SATELLITE_M100-221.html

Processor Model: T5600

https://www.techpowerup.com/cpu-specs/core-2-duo-t5600.c378

VT-x

https://superuser.com/questions/1584771/what-is-difference-between-vmx-and-vt-x

The CPU flag for VT-x capability is “vmx”; in Linux, this can be checked via /proc/cpuinfo